Advertising Disclosure

5 Best Wood Lathe Tool Sharpening Systems of 2026

Last Updated - 2026/04/03

1
Best Choice

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

NAGU

10'' Water Cooled Sharpening System for Edge Tools，Two-Direction Double Grinding Wheel Variable-Speed Wet Sharpener (Double Grinding Wheel)

NAGU

CA$542.16

More Details
Main highlights
- VARIABLE SPEED: Powerful 300W amp motor, rotated with 90~300 RPM，It has two modes: continuously variable transmission and gear speed regulation， Two-Direction Variable-Speed for maximum precision during sharpening, control it at your preferred speed
- UNPARALLELED CONFIGURATION: One piece die cast aluminum casing, belt drive with metal gears, using double-sided ball bearings and bearing seats for high-strength spindle
- UNIVERSAL JIG: Two-position jig support adjusts to both horizontal and vertical positions and ensures that your tools are consistently cut at the right angle on tools easy and consistently
- REVERSE SWITCH: The rotational direction can be reversed by pushing the power switch up and down. resuscitate dull blades, wood chisels, carving tools, scissors, screwdrivers, lathe tools, axes and more. Ideal for wood turners, wood workers and knife makers to sharpen dull blades, wood chisels, and carving tools.
- COOLING ACTION: 10-inch 220 grit + 600 grit aluminum oxide sharpening wheel finish your sharpened tool. The water tray can keep tools cool while sharpening and prevent residue buildup, making woodworkers efficiently remove steel and sharpening tools without any overheating
CA$542.16
2

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Woodcut Tools

Woodcut Tools Tru-Grind Woodturning Sharpening Tool is an Easy Repeatable Precise Jig for Turning Tools Including Gouges Scrapers Parting Tools Skew Chisels Carving Carpenters Lathe and Drills bits

Woodcut Tools

CA$395.63

More Details
Main highlights
- RESULTS IN A SMOOTH FINISH TO YOUR PROJECTS - The Tru Grind Sharpening System will enable you to turn wood to a finish so smooth that even the end grain requires no sanding. Exact bevels will not only give your projects a smooth finish but also give you safer, more predictable tools. You will find you are sharpening your tools less which in turn means both your wheels and tools will last longer.
- MOST PRECISE JIG AVAILABLE - The Tru Grind lathe tool sharpening jig has been thoughtfully designed and manufactured with a high quality design and finish. Unlike others in the market it locks into place producing precise, easy, sharpening. No mucking around to get the right sharpening angle each time therefore speeding up the process and saving tool length. Simply set the number on your lathe tool sharpening jig to repeat your preferred bevel every time.
- COMPLETE SYSTEM GIVING EXACT BEVEL - Base slide which is adjustable to set up on either side of your sharpening wheel. Jig designed to take mini tools right up to 1-1/2" in diameter tools. Unlike with other brands there is no need for several jigs and multiple accessories in your workshop. Fits most popular brands of 6" or 8" dry bench grinders such as Rikon or Jet.
CA$395.63
3

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Peachtree Woodworking Supply

Peachtree Woodworking Supply Pro Grind Sharpening System for 6 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges •Includes Setup Blocks and Quad Jig for 6 inch Grinders

Peachtree Woodworking Supply

CA$250.96

More Details
Main highlights
- The large, 3” x 5” slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
- The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O’Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125” in diameter.
- The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
- The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you’ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
- Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you’ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
CA$250.96
4

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

Peachtree Woodworking Supply

Pro Grind Sharpening System for 8 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges • Includes Setup Blocks and Quad Jig for 8 inch Grinders

Peachtree Woodworking Supply

CA$250.72

More Details
Main highlights
- The large, 3” x 5” slotted platform is the ideal way to sharpen flat edged tools like wood turning skews, chisels and hand plane irons. The platform has a slot milled horizontally through it so it can accept the included tool holder. The tool holder is designed to keep your tools at the correct angle while being able to slide side to side during the sharpening process.
- The included and versatile Multi-Grind Jig will correctly shape the edge on bowl gouges, side grinds (aka Ellsworth grind, Liam O’Neil grind/Irish grind) or fingernail grinds for spindle work and detailing. Not only will it correctly shape your tools, you will also be able to repeat the process to produce consistent results every time. The Multi-Grind Jig is designed to be used with the included Multi-Grind arm on the PRO GRIND Sharpening System and will accept tools up to 1.125” in diameter.
- The PRO GRIND Tool Rest Bar attachment offers you the best possible way to achieve a precise edge to your bevels without taking of too much material off of your tool. After all, we need our tools to last a long time, so why would you want to take off to much at a time? The Tool Rest Bar is ideal for sharpening curved, even bevel edges that are typically used on spindle and roughing gouges.
- The PRO GRIND Sharpening System also comes with a number of setup jigs and accessories to help in the setup process to sharpen your tools to the proper and repeatable angles. From the built-in projection gauge on the Multi-Grind arm to the Magnetic Micro Bevel setup block you’ll be able to achieve consistent repeatable angles and produce excellent results each and every time you use the PRO GRIND Sharpening Jig system.
- Sharpen chisels, gouges, bowl gouges, spindle gouges, carving tools, wood turning scrapers, parting tools, block plane irons and more with the PRO GRIND Sharpening System! With 3 primary methods of sharpening, you’ll be able to precisely hone each tool to your exacting specifications regardless of the tool you are sharpening. The PRO GRIND Sharpening System includes a vast collection of unique setup tools, jigs and accessories that most sharpening systems force you to purchase separately
CA$250.72
5
Best Value
10% Off

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

WEN
10% Off

Wen 8-Inch Water-Cooled Wet/Dry Sharpening System (BG4108)

WEN

CA$197.73

CA$218.94
(10% Off)

More Details
Main highlights
- Universal jig support allows for compatibility with a wide variety of accessories, including the WEN 42704B and 42703 Sharpening Kits
- Includes an angle guide, honing compound, an adjustable water reservoir, and a jig for sharpening chisels and planer blades
- Features an 8-inch 220-grit sharpening stone and an 8-3/4-inch leather stropping wheel
- Adjustable-height reservoir can be easily repositioned as the stone wears down
- 120 RPM provides maximum precision during sharpening
CA$197.73
CA$218.94 (10% Off)

5 Best Wood Lathe Tool Sharpening Systems of 2026

10'' Water Cooled Sharpening System for Edge Tools，Two-Direction Double Grinding Wheel Variable-Speed Wet Sharpener (Double Grinding Wheel)

Woodcut Tools Tru-Grind Woodturning Sharpening Tool is an Easy Repeatable Precise Jig for Turning Tools Including Gouges Scrapers Parting Tools Skew Chisels Carving Carpenters Lathe and Drills bits

Peachtree Woodworking Supply Pro Grind Sharpening System for 6 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges •Includes Setup Blocks and Quad Jig for 6 inch Grinders

Pro Grind Sharpening System for 8 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges • Includes Setup Blocks and Quad Jig for 8 inch Grinders

Wen 8-Inch Water-Cooled Wet/Dry Sharpening System (BG4108)

You may also like...

GrindMaster Lathe Tool Sharpening Jig with Quad Setup, Multi-Grind Jig and Two Setup Blocks (for 8" Grinders)

Lathe Tool Sharpening Jig, Sharpening System for 6" & 8" Bench Grinder with Platform Fixtures, Tool Rest Bar, Positioning Blocks, Micro Slope Blocks, Suitable for Woodworking and Turning Tools

Lathe Tool Sharpening Jig, Sharpening System for 6" & 8" Bench Grinder with Platform Fixtures, Tool Rest Bar, Positioning Blocks, Micro Slope Blocks, Suitable for Woodworking and Turning Tools

Lathe Tool Sharpening Jig, Multi-Grind Jig for Grinders, Woodturning Chisels and Tools, Sharpening Gouges, Chisels, Scrapers, Parting tools, Skews, and Carving Tools.

Depisuta Lathe Tool Sharpening Jig, Pro Grind Sharpening System with Setup Blocks and Quad Jig for 8 Inch Bench Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle

Pro Grind Multi-Grind Lathe Tool Sharpening Jig with Setup Blocks – Bowl Gouge & Chisel Sharpening Jig for Wood Turning Tools – Compatible with Pocket V-Arm Systems

BG-GRIND4 4PCS Set Complete Grinding Jig System for Wood Chisels, Grind Sharpening System to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges etc.

BMWOOD BG-GJ Set Complete Grinding Jig System for Wood Chisels, Grind Sharpening System for 8 Inch Grinders to Sharpen Lathe Turning Tools, Chisels, Skews, Bowl Spindle Gouges.

BMWOOD LG-GRIND Lathe Tool Rest Sharpening System Kit, used on Woodturning Lathe, Grinding Jig for wood chisels.

DEEFIINE Carbide Tip Wood Lathe Turning Tool Kit, Lathe Roughing and Finishing Hollow Tool Interchangeable Aluminum Alloy Handle with Diamond Round Square Carbide Blade (Aluminum Alloy Handle)

Sign up and get exclusive special deals