Advertising Disclosure

5 Best Fiio Btr5 Vs Qudelix 5ks of 2025

Last Updated - 2025/09/17

1
Best Choice

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

FiiO

FiiO FT5 90mm Open Planar Magnetic Headphones

FiiO

CA$649.00

More Details
Main highlights
- Open-backed design, A more natural sound, a more musical sound | Lightweight magnesium alloy construction, Reduced weight, better comfort
- Micron-level aluminium-silver alloy coil, Ideal combination of acoustics and easiness of power
- Large 90mm planar magnetic driver | 6μm ultra-thin diaphragm - Only 1/10 of the hair’s thickness
- Impedance: 36Ω | Frequency response: 7Hz-40kHz
- High sensitivity and easy to power: 110dB/1Vrms@1kHz | 96dB/mW@1kHz
- Cable material: 392 wires of high-purity silver-plated monocrystalline copper
- Cable connector: Dual 3.5mm plugs on headphone end, with swappable audio plugs
- 20 neodymium magnets per driver, Balanced force, for precise sound
CA$649.00
2

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

FiiO

FiiO FH5s Hybrid in-Ear Monitors - Black

FiiO

CA$356.16

More Details
Main highlights
- 【Twist-lock swappable plug】The twist-lock swappable plug allows you to switch between 2.5mm/3.5mm/4.4mm heads to cover a wide range of scenarios.
- 【Semi-open design at the rear cavity】 Quickly relieve air pressures on the ear – leading to more comfortable and long listening sessions
- 【All-new acoustic design】12mm beryllium-plated diaphragm + PU gasket dynamic low frequency driver, this driver is capable of some seriously deep and potent yet controlled bass.
- 【6mm beryllium-plated dynamic mid frequency driver】 Greatly-improved sensitivity, smoother coherency and less distortion --Time-tested Knowles TWFK-30017 high frequency balanced armature Lush, clean and pleasant vocals and exquisite treble
- 【3 sound adjustment switches, 8 possible sounds】The FH5s’s use of electronic crossover technology allows you to tune the sound to exactly the way you want with 3 sound adjustment switches. The impedance, bass, mids and treble adjustment depends on what music you are listening or what your preferences are!
CA$356.16
3
Best Value

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

FiiO

FiiO BTR17 Bluetooth 5.4 USB DAC AMP with LDAC, aptX Lossless. Dual ES9069Q, 10-Band PEQ, THX AAA 78+amps 3.5mm Unbalanced & 4.4mm Balanced (Black)

FiiO

CA$280.00

More Details
Main highlights
- With lower latency, more stable transmission, and better compatibility than regular USB chips, the device supports 768kHz/32bit, hardware decoding for DSD512, and full MQA decoding. It also features PEQ developed on this platform, allowing adjustments via both the app and web interface, with support for high-definition PEQ at a sampling rate of up to 192kHz.
- When enabling desktop mode and using the BTR17 to connect to a smartphone as a tail DAC/amp, you can connect the dedicated power input to an adapter. In this case, the battery will be fully powered by USB, preventing overcharging and overdischarging. The device also delivers a powerful 650mW output capability while not consuming the smartphone's battery.
- The BTR17 is equipped with two ESS flagship dual-channel DACs, the ES9069Q, based on the fourth-generation 32-bit HyperStream architecture. This allows for enhanced performance and lower power consumption. Additionally, it further reduces digital noise within the DAC, achieving a dynamic range of 130dB and total harmonic distortion of -120dB. The result is a richer musical experience with a purer sound background.
- The BTR17 features a convenient and user-friendly three-mode switch (PC/BT/PHONE), allowing for seamless one-click switching between computer soundcard, Bluetooth DAC/amp, and smartphone tail DAC/amp modes. It automatically optimizes the power supply status based on the connected front-end device, offering versatile usage and greater peace of mind.
- Equipped with Qualcomm's new-generation flagship Bluetooth chip, the QCC5181, the UTWS5 2025 supports Bluetooth 5.4, complies with the LE Audio standard, and offers a bandwidth transmission capability of up to 2.1Mbps. It also supports the Lossless specification in the aptX Adaptive system, as well as audio codecs like LDAC and aptX Adaptive at 96kHz/24bit.
CA$280.00
4

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

FiiO

FiiO BTR7 Headphone Amp Bluetooth Receiver High Resolution Portable DAC Supports LDAC/aptX HD 384K/32Bit DSD256 CVC 8.0 for Phone/PC/Car/Home Audio (Type C)

FiiO

CA$259.90

More Details
Main highlights
- [cVc 8.0 and built-in microphone]: BTR7 bluetooth amplifier supports cVc 8.0, supports Bluetooth voice call, supports earphones with CTIA in-line controls.
- [Support hi-res Bluetooth format]: BTR7 bluetooth amplifier supports Bluetooth 5.1, LDAC/aptX Adaptive/aptX LL/aptX HD/aptX/AAC/SBC hi-res wireless format.
- [Lossless sound and support MQA]: The BTR7 bluetooth amps relies on the XMOS XUF208 chip to receive and decode audio data streams, with support up to PCM 384kHz and native DSD256. In USB DAC mode and with an MQA player, up to MQA 8x rendering is supported.
- [High performance DAC]: Each of the left and right channels of the BTR7 bluetooth DAC is the ES9219C, which is paired with a low-pass filter and an amplifier in a highly-optimized audio architecture that captures every last detail and dynamics in your music. And with support for MQA, your music will definitely come across clearly and boldly.
- [3.5mm+4.4mm dual output]: Widely compatible with the BTR7 headphone amps, this means a 4.4mm balanced headphone output in addition to the traditional 3.5mm single-ended headphone output - for a more detailed audio experience in a jack format now widely used.
CA$259.90
5

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

FiiO

FiiO K7BT Balanced HiFi DAC Bluetooth Headphones Amplifier AK4493S*2, XMOS XU208 PCM384kHz DSD256, USB/Optic/Coaxial/RCA Inputs, 6.35mm/4.4mm Output

FiiO

CA$349.00

More Details
Main highlights
- number of channels: 1
- interface type: USB
- brand: FiiO
CA$349.00

5 Best Fiio Btr5 Vs Qudelix 5ks of 2025

FiiO FT5 90mm Open Planar Magnetic Headphones

FiiO FH5s Hybrid in-Ear Monitors - Black

FiiO BTR17 Bluetooth 5.4 USB DAC AMP with LDAC, aptX Lossless. Dual ES9069Q, 10-Band PEQ, THX AAA 78+amps 3.5mm Unbalanced & 4.4mm Balanced (Black)

FiiO BTR7 Headphone Amp Bluetooth Receiver High Resolution Portable DAC Supports LDAC/aptX HD 384K/32Bit DSD256 CVC 8.0 for Phone/PC/Car/Home Audio (Type C)

FiiO K7BT Balanced HiFi DAC Bluetooth Headphones Amplifier AK4493S*2, XMOS XU208 PCM384kHz DSD256, USB/Optic/Coaxial/RCA Inputs, 6.35mm/4.4mm Output

You may also like...

FiiO UTWS5 2025 True Wireless Bluetooth Earbuds Hook & Headphone Amp for IEMs, AK4332 DAC, Hi-Res 96kHz/24bit LDAC -MMCX/0.78 2pins Connector, 10-Band PEQ, 20H Battery Life (MMCX)

FiiO BTR7 Headphone Amp Bluetooth Receiver High Resolution Portable DAC Supports LDAC/aptX HD 384K/32Bit DSD256 CVC 8.0 for Phone/PC/Car/Home Audio (Comes with USB Type C to Lightning Cable)

FiiO K5Pro Amplifier Headphone Amps Stereo High Resolution Portable Desktop DAC 768K/32Bit and Native DSD512 for Home Audio/PC 6.35mm Headphone Out/RCA Line-Out/Coaxial/Optical Inputs (K5PRO ESS)

FiiO FF5 Carbon-Based Dynamic Driver in-Ear Earphone Clear Sound & Wide Soundstage with 3.5mm/4.4mm MMCX Cable, Alumium Shell

DAC-D5 Decoder Receiver ES9038 Headphone Amplifier Supports USB APTX-HD LDAC HiFi Preamplifier with Remote Control

FiiO BTR13 Bluetooth Headphone Amplifier with LDAC, aptX Adaptive, aptX HD, AAC (Dual CS43131 3.5mm Unbalanced & 4.4mm Balanced Output) (Black)

FiiO BTR13 Bluetooth Headphone Amplifier, LDAC, aptX Adaptive, aptX HD, AAC, 3.5mm Unbalanced, 4.4mm Balanced Output, Blue

FiiO BTR15 Headphone Amps Bluetooth 5.1 Receiver High Resolution 384K/32Bit Native DSD256 USB DAC Supports LDAC/aptX HD/MQA for Smartphones/PC/Car/Home Audio (Black)

FiiO KA5 USB DAC Headphone Amp with 3.5mm and 4.4mm Outputs

FiiO BTR7 Headphones Amp Bluetooth Receiver High Resolution Portable DAC Support MQA/LDAC/aptX HD 384K/32bit DSD256 for Phone/PC/Car/Home Audio (Titanium)

Sign up and get exclusive special deals