Advertising Disclosure

5 Best 110v Plasma Cutters of 2025

Last Updated - 2025/07/05

1
Best Choice

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

SILATU

SILATU 75Amps Plasma Cutter, Large LED Display, Non-Touch Pilot Arc, Air Sensor Technology, 110/220V Dual Voltage IGBT Inverter Plasma Cutter Machine, 1'' Max Cutting Thickness

SILATU

CA$549.99

More Details
Main highlights
- Plasma Cutting Thickness: With advanced IGBT inverter technology, the 50/60 Hz high-frequency pilot arc plasma cutter supports dual voltage inputs of 110V and 220V, and operates at 60% duty cycle. At 110V, the current range is 15-40A. At 220V, The current ranges 15-75A. The recommended maximum cutting thickness is 12mm at 40A and 45 PSI on 110V, And 25mm at 75A and 70 PSI on 220V.
- Pilot Arc Plasma Cutter: The STC750P plasma cutter with pilot arc function, It’s a high-frequency non-contact arc starting method, This means the torch head doesn't need to make contact with the metal plate. With the addition of a PA (Pilot Arc) adjustable function, the maintenance time of the pilot arc is extended, reducing energy consumption during non-cutting periods and minimizing electrode wear, extend consumables life.
- PT/2T/4T/PA Function: The post-time function can be adjusted between 3-15 seconds, helping to cool the torch head and extend the life of consumables. A cooling time of 4-8 seconds is generally recommended. The 2T and 4T modes offer automated cutting control, relieving the user's hand. 2T is a semi-automatic cutting control, whereas 4T is fully automatic. The PA setting adjusts the duration of the pilot arc, with longer settings ideal for cutting mesh metal and shorter settings beneficial for extending the life of consumables.
- Large Digital Display Screen: The digital display screen shows parameters like air pressure, voltage, and current, enabling users to monitor the equipment's status in real-time and make adjustments as needed, enhancing operational efficiency. In the event of a malfunction, the screen displays an error code, facilitating quick troubleshooting.
- Air Sensor Technology: The air sensor built in machine displays the air pressure on the front panel of the machine. Users can adjust the air pressure manually through the air regulator (air pressure cannot be automatically adjusted). An air filter is installed at the back of the machine, equipped with a quick-connect 1/4 NPT air connector, ready for use right out of the box. Once connected to an air compressor, the recommended air pressure should be within 65 PSI, with a flow rate of 250 liters per minute
- 100% Duty cycle in light work, 60% Duty cycle in heavy work; Max cutting thickness 1/2'' in 110V 45PSI 40Amps 100mm/min cutting speed, Max cutting thickness 1'' in 220V 70PSI 75Amps 150mm/min cutting speed.
CA$549.99
2

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

ARCCAPTAIN

ARCCAPTAIN iControl Cut55 Pro Plasma Cutter, [APP Control] 55 Amp Non-Touch Pilot Arc 120V/240V Plasma Cutter Machine, Large LED Display and 2T/4T, 3/4 inch Maximum Cut, DC Inverter IGBT

ARCCAPTAIN

CA$489.99

More Details
Main highlights
- SAFETY AND DURABILITY: Equipped with a smart fan and advanced cooling system that cuts noise by 50%, doubles cooling efficiency, and extends machine life by 50%. Waterproof, dustproof, and corrosion-resistant, it lowers failure risk by 70%. Features VRD function, fault alarms, and protection against overcurrent, overvoltage, overload, and overheating. Certified by TÜV and ANSI.
- PILOT ARC FUNCTION: The CUT55 Pro plasma cutter features a high frequency non-touch arc starting mode. Arc initiation without contact allows for cutting steel surfaces with dirt, rust, or coatings without affecting cutting performance. This greatly facilitates user operation and, since it avoids contact with the workpiece, helps to prevent torch damage and extend its lifespan.
- ONE MIN START CUTTING: Equipped with a pre-installed air regulator & filter for quick installation in 1 minute. It includes a high-quality filter pressure regulator that allows for rapid adjustment of air pressure, while filtering out water, oil, and impurities from the gas to ensure clean air and stable pressure.
- CUTTING THICKNESS UP TO 20MM: Featuring a brand-new MCU technology upgrade, the plasma cutter machine has a high degree of internal integration, combining full digitalization for more precise control of cutting parameters such as current and voltage. This results in better cutting effects and improved stability. Cutting thickness: Quality 12mm (1/2"), maximum 20mm (3/4").
- APP CONTROL: Enables easy interaction with the plasma cutter machine via APP. Allows parameter adjustments, real-time monitoring, and status detection from up to 50 meters away. Users can choose cutting processes, save settings, and access FAQs, making it ideal for beginners and for ongoing maintenance.
- 2T/4T & INTELLIGENT POST-BLOW: 2T mode is suitable for flexible cutting, while 4T mode helps alleviate fatigue from prolonged operation. Cutting current 20-34A, post-blow time 5s; Cutting current 35-45A, post-blow time 8s; Cutting current 46-55A, post-blow time 10s. No manual adjustment of post-blow time is required, making it more convenient.
CA$489.99
3
11% Off

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

ARCCAPTAIN
11% Off

ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY

ARCCAPTAIN

CA$389.99

CA$439.99
(11% Off)

More Details
Main highlights
- 【Ultra-Portable Design】At only 13 lbs, carry it anywhere with the included shoulder strap. Fits in tight spaces – ideal for job sites, garages, and DIY workshops. Please note: current display at 110V is 20-35A, under 220V is 20-50A.
- 【Smart Cutting Control】Customize post-flow cooling (5-15s) and switch between 2T/4T modes for seamless operation. Adjust the post-flow cooling time of the torch head to extend the service life of consumables. Recommend a cooling time of 4-8 seconds.
- 【Powerful Cutting Aibility】Switch effortlessly between 110V/220V for home or workshop use. Achieve professional 1/2" clean cuts on steel, aluminum and copper with advanced IGBT technology. Perfect for DIY projects and heavy-duty tasks! The maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 18mm@50A 220V, 60 PSI. NOTE: Requires compressed air (compressor sold separately).
- 【LED Screen Display】Newly upgraded LED display, it centrally display parameters such as voltage, and current, makes it easier to adjust and view real-time data– no need to remove your safety helmet! If plasma cutter cannot work, the screen comes with an error code, making it easy to find out the problems.
- 【30-Second Setup】Plug-and-play design with built-in air regulator – no tools required! Compatible with standard air compressors (5.3CFM). The air pressure is best for 0.4mpa-0.6mpa, the recommended flow rate of 150L/min, that is, 5.3CFM, 57.5psi. Includes PT31 Torch for precision cutting.
CA$389.99
CA$439.99 (11% Off)
4

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

bestarc

bestarc Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Screen Display Dual Voltage 110/220V Digital Plasma Cutting Machine (BTC500DP 7Gen 110/220V)

bestarc

CA$389.99

More Details
Main highlights
- [Sensor of Air Pressure & Air Compressor]: Inside of machine have sensor of air pressure, User can adjust the air pressure through the regulator. The air filter is installed at the rear of the machine with a quick air connector 1/4 NPT, which can be used after opening the box. Users can use it after connecting to the air compressor. Recommended air compressor air pressure value be within the range of 90PSI, 250L/min.
- [Pilot Arc Function]: BTC500DP 7th plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. Added PA adjustable function, extended pilot arc maintenance time, reduce energy consumption in non cutting work, reduce electrode burning, and extend service life.
- [PT/2T/4T/PA Function]: Post time function, with an adjustment range of 3-15 seconds. Adjust the cooling time of the torch head to extend the service life of consumables. Generally speaking, we recommend a cooling time of 4-8 seconds. 2T/4T automatic cutting release your finger. 2T is semi-automatic cutting control, and 4T is automatic cutting control. PA adjust the time for the pilot arc, longer seconds good at cutting mesh metal, short seconds is good to extend the life of consumables.
- [Digital Screen Display]: The screen centrally display parameters such as air pressure, voltage, and current, allowing users to understand the equipment status in real-time and adjust operations in a timely manner, improving operational efficiency. If plasma cutter cannot work, the screen comes with an error code system, making it easy to find out the problems.
- [Cutting Thickness]: Adopting advanced IGBT inverter technology, 50/60Hz high-frequency pilot arc plasma, dual voltage 110/220V, 60% duty cycle. Current display at 110V is 15-35A, Under 220V current display is 15-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 50PSI; 16mm@50A 220V, 60 PSI.
CA$389.99
5
Best Value
25% Off

✖
Our rankings are cleverly generated from the algorithmic analysis of thousands of customer reviews about products, brands, merchant’s customer service level, popularity, trends and more. The rankings reflect our opinion and should be a good starting point for shopping.

YESWELDER
25% Off

YESWELDER Plasma Cutter 65 Amp Non High Frequency Non-Touch Pilot Arc Digital Plasma Cutter, DC Inverter 110/220V Dual Voltage Blowback Large LED Digital Display Plasma Cutting Machine CUT-65DS

YESWELDER

CA$449.99

CA$599.99
(25% Off)

More Details
Main highlights
- PT/2T/4T Function: Post time function, adjustable from 5-20 seconds. Adjust the cooling time of the welding head to extend the life of consumables. Generally, we recommend a cooling time of 5-8 seconds. 2T/4T auto cut releases your fingers. 2T is a semi-automatic cutting control, 4T is an automatic cutting control.
- POWERFUL CUT: CUT-65DS adopts the international leading MCU intelligent digital control technology, all the main components are realized by software. Ideal Clean Cut: 5/16"@110V, 5/8"@220V Maximum Cut: 1/2"@110V, 63/64"@220V.
- NON-TOUCH PILOT ARC: The pilot arc IPT40 torch has better cutting performance, which efficiently cuts through rough, painted, and rusty surfaces, while producing minimal slag.
- NON-HIGH FREQUENCY: The ''blow-back'' start comes without interference and is safe and ideal for general use, friendly to the surrounding electrical machines and human health.
- DIGITAL DISPLAY: The screen centrally displays parameters such as air pressure, voltage, current, etc., allowing users to understand the status of the equipment in real time, adjusting the operation in a timely manner, and improving the efficiency of the operation. If the plasma cutting machine can not work, there will be an error code system on the screen, it is easy to find the problem.
- AIR FILTER REGULATOR: There is an air pressure sensor inside the machine, users can adjust the air pressure by the regulator. The air filter is mounted at the rear of the machine, which allows for quick connection and saves installation time and improves efficiency.
CA$449.99
CA$599.99 (25% Off)

5 Best 110v Plasma Cutters of 2025

SILATU 75Amps Plasma Cutter, Large LED Display, Non-Touch Pilot Arc, Air Sensor Technology, 110/220V Dual Voltage IGBT Inverter Plasma Cutter Machine, 1'' Max Cutting Thickness

ARCCAPTAIN iControl Cut55 Pro Plasma Cutter, [APP Control] 55 Amp Non-Touch Pilot Arc 120V/240V Plasma Cutter Machine, Large LED Display and 2T/4T, 3/4 inch Maximum Cut, DC Inverter IGBT

ARCCAPTAIN Plasma Cutter, [Large LED Display] 50Amps Cutter Machine with 110/220V Dual Voltage DC Inverter IGBT 1/2 Inch Clean Cut Post Flow and 2T/4T, for Beginners DIY

bestarc Plasma Cutter, Pilot Arc BTC500DP 7th Generation 50Amps Screen Display Dual Voltage 110/220V Digital Plasma Cutting Machine (BTC500DP 7Gen 110/220V)

YESWELDER Plasma Cutter 65 Amp Non High Frequency Non-Touch Pilot Arc Digital Plasma Cutter, DC Inverter 110/220V Dual Voltage Blowback Large LED Digital Display Plasma Cutting Machine CUT-65DS

You may also like...

YESWELDER 55 Amp Plasma Cutter Non-High Frequency, Non-Touch Pilot Arc, Digital DC Inverter 110/220V Dual Voltage Cutting Machine CUT-55DS PRO

ARCTAYLOR Plasma Cutter 55Amps CUT55P,Non-Touch Pilot Arc,110/220V Dual Voltage IGBT Inverter, Air Sensor Technology, Large Digital Display Plasma Cutting Machine (CUT55P)

VEVOR Plasma Cutter, 50Amp, Air Cutting Machine with Plasma Torch, 110V/220V Dual Voltage AC IGBT Inverter Metal Cutting Equipment for 1/2" Clean Cut Aluminum and Stainless Steel, Black

bestarc Plasma Cutter, 55Amp Blow Back Pilot Arc with [Air Sensor Technology], 110V/220V Dual Voltage Non-HF Plasma Cutting Machine, Digital Screen Display (CUT55XP 110V/220V)

Plasma Cutter TIG Welder (Pulse) Stick Welder - CT418 3 in 1 Plasma Cutter Welder Combo Multi-function Tig Welding 180A ARC/MMA Welder 40A Air Plasma Cutting 110V/220V Inverter Portable Welder Machine

Plasma Cutter,35Amp Plasma Cutting Machine CUT35i, Screen Display 110V HF 50/60Hz Invert Technology Plasma Cutter, Max Cutting Thickness 8mm…

bestarc Plasma Cutter, CUT35A 35Amps 110V Single Phase, IGBT Inverter Plasma Cutting Machine for Beginner plasma cutter machine Home DIY(CUT35A 110V)

FLARING Plasma Cutter,65 Amp Pilot Arc Plasma Cutter Machine 120V/240V Dual Voltage Non-Touch Plasma Cutter 1/2"(12.7mm) Clean Cut 4/5"(20mm) Severance Cut with Consumable Set Digital Display

Reboot Plasma Cutter, 60 Amp Pilot Arc Plasma Cutter Machine Non-Touch, 1/2 inch (12 mm) Clean Cut, 3/4 inch (19 mm) Severance Cut, Dual Voltage 110/120V or 220/240V Digital Display

PLASMARGON Plasma Cutter 55Amp PLC55 Plasma Cutting Equipment Dual Voltage 110V 220V, IGBT DC Inverter Portable Air Plasma Cutter Machine 1/2 Inch Clean Cut Intelligent Digital Display 55A

Sign up and get exclusive special deals